JL
JLink Technology 傑聯特科技
RFQ
W5300 In Stock

W5300 Hardwired TCP/IP Ethernet Controller (Parallel)

The W5300 is a WIZnet hardwired TCP/IP Ethernet controller with 8 independent hardware sockets, a 128KB TX/RX buffer, an 8/16-bit parallel host interface, and an embedded 10/100 PHY, supporting TCP/UDP/ICMP/IPv4/ARP/IGMP/PPPoE. Its high-throughput parallel architecture suits industrial networking, serial-to-Ethernet, and data acquisition. 100-LQFP package.

Type
Hardwired TCP/IP
Hardware Sockets
8
Internal Buffer
128 KB
Host Interface
8/16-bit parallel

Features

  • Hardwired TCP/IP: TCP/UDP/ICMP/IPv4/ARP/IGMP/PPPoE
  • 8 independent hardware sockets, simultaneous
  • 128KB internal TX/RX buffer (configurable)
  • 8/16-bit parallel host bus (direct/indirect addressing)
  • Embedded 10/100 PHY, auto-negotiation, MDI/MDIX
  • 100-pin LQFP (14×14mm)

Specifications

Type Hardwired TCP/IP
Hardware Sockets 8
Internal Buffer 128 KB
Host Interface 8/16-bit parallel
Ethernet 10/100, embedded PHY
Package 100-LQFP (14×14)

Applications

Hardwired TCP/IPEthernetW53008 SocketsParallel10/100
W5300 WIZNET 100-LQFP (14×14)

Order Info

Stock, pricing, lead time, and samples for W5300 — we reply within one business day.

Request Quote Request datasheet / sample
WIZnet logo

WIZnet

Korea

Hardwired TCP/IP Ethernet ICs & PoE Modules

View all WIZnet products → Official WIZnet site

Selection guides & comparisons

W5300 — Frequently Asked Questions

Where can I buy W5300?
JLink Technology is an authorized WIZnet distributor serving Taiwan, Mainland China, and Hong Kong. Submit an RFQ for W5300 and we will respond with pricing and lead time within one business day.
Is W5300 in stock?
Stock and lead time for W5300 vary by quantity. Send us your required quantity via the RFQ form and we will confirm current availability and delivery schedule.
Can I get the W5300 datasheet and samples?
Yes. As an authorized WIZnet distributor, JLink Technology can provide the official W5300 datasheet, samples, and engineering support. Contact us to request them.
What is the minimum order quantity for W5300?
We support orders from prototype samples to mass production. Tell us your target volume in the RFQ and we will quote accordingly.
Is there a pin-compatible alternative or second source for W5300?
Tell us the part you need to replace and your application. As a multi-line authorized distributor, JLink Technology can suggest a verified cross-reference or second source related to W5300 where one exists, and quote pricing, stock, and lead time.

Related Products

W55RP20 In Stock

W55RP20 RP2040 + W5500 Ethernet SiP

The W55RP20 is a WIZnet SiP integrating a Raspberry Pi RP2040 (dual Cortex-M0+) with the W5500 hardwired TCP/IP Ethernet controller in a single QFN68 package. With 2MB flash, 264KB SRAM, a hardwired TCP/IPv4 stack (8 sockets, 32KB/32KB TX/RX buffer), and an embedded 10/100 PHY, it builds compact industrial-Ethernet nodes with no external Ethernet chip. Programmable in C/C++ or MicroPython, with SWD debug.

Ethernet SiPRP2040W5500
W6300 In Stock

W6300 IPv4/IPv6 Hardwired TCP/IP Ethernet Controller

The W6300 is WIZnet's first Ethernet controller with a dual IPv4/IPv6 hardwired TCP/IP stack, using a high-speed QSPI (single/dual/quad) host interface, a system clock up to 150MHz, and throughput up to ~90Mbps. With an embedded 10/100 PHY (auto-negotiation, Auto-MDIX), 8 hardware sockets, a 64KB buffer, and ICMPv6/WOL support, in 48-LQFP/QFN at 3.3V with 5V-tolerant I/O, it suits IPv6-ready industrial and IoT devices.

Ethernet ControllerIPv6TCP/IP
WIZ550io In Stock

WIZ550io Auto-Configurable W5500 Ethernet Module

The WIZ550io is a WIZnet auto-configurable Ethernet module based on the W5500, with a pre-programmed unique MAC address, integrated PHY, transformer, and RJ45 (MAGJACK), and self-initialization on power-up (default IP 192.168.1.2). It connects to a host over SPI (up to 80MHz), with 8 hardware sockets and a 32KB buffer — plug-and-play wired networking for any MCU.

Ethernet ModuleW5500TCP/IP